TaylorMade Milled Grind PROTO Custom Wedge

ONCE RESERVED FOR TOUR – NOW AVAILABLE TO YOU

Previously crafted exclusively for our Tour athletes, the fully forged MG PROTO wedge is now available in limited quantities for you to experience. As a genuine tour part, the MG PROTO is only available in a full RAW head and offered in our all-new SC and SX grinds. This small-batch release delivers unmatched feel and precision around the greens.

TECHNOLOGY

GAIN CONTROL WHERE YOU NEED IT MOST

MG PROTO wedges, which feature a Tour-raw finish, have already made a big splash on the PGA TOUR. Collin Morikawa, Tommy Fleetwood and Jacob Bridgeman have already performed extensive testing and it was gamed by multiple Tour players in its first week on Tour.

ALL-NEW GRINDS

MG PROTO wedges feature two all-new Tour-inspired grinds designed to suit a wide range of players and turf conditions.

SC Grind

The medium-low bounce SC grind employs a cambered sole and softened heel, toe and trailing edge. This grind is perfect for players that like to manipulate the face and hit a wide variety of shots.

SX Grind

The SX grind features increased offset and a rounded leading edge that allows golfers to open the face and feel like theyre still aimed square to the target. The reverse-C back grind increases stability and forgiveness. This grind performs ideally in a wide array of turf conditions.

GALLERY

TaylorMade Milled Grind PROTO Custom Wedge Product Specs

Note: This is for your reference only and does not denote the content of the product.

Shaft Specs

DYNAMIC GOLD TOUR ISSUE – SHAFT

GOLF PRIDE Z – GRIP

TaylorMade Milled Grind PROTO Custom Wedge Shafts

Aerotech

Aerotech SteelFiber fcis a great shaft for those slower swing speed players looking to raise ball flight and gain as much yardage as possible.

Aerotech SteelFiberis a great shaft for those slower swing speed players looking to raise ball flight and gain as much yardage as possible.

Fujikura

Fujikura Speeder NX TCS

Fujikura Speeder NX TCS 40

Fujikura Ventus TR Blue HBdesigned to significantly tighten shot dispersion and maximize ball speed especially on off-center shots.

KBS

KBS C-Taper Lite incorporates proven KBS performance benefits in a lighter weight design. The firm tip and soft butt produce a mid-high trajectory and controlled spin. Featuring a constant taper design and proportionate increase in wall thickness, the C-TAPER LITE optimizes energy transfer for maximum distance. Independent testing results revealed 5+ yards in added distance.

KBS C-Tapershaft maximizes energy transfer, for a crisp feel, while optimizing shaft diameters in the taper and tip areas for low trajectory and spin control. Independent testing proves the C-TAPER shaft to average 5% more distance versus the market leader as well.

KBS Hi-REV 2.0 115gfeatures an active tip section that increases the effective loft of the club head, delivering a higher ball launch with more spin for added stopping power and accuracy.

KBS S Taper ChromeEngineered to provide superior feel while maintaining shot workability for players seeking a mid-launch and low to mid spin shaft.Shares the same bend profile as the KBS Tour shafts only with elongated step patterns to control spin, generating stable performance throughout the swing.

KBS MAX Graphitedesigned for a wide range of players seeking to MAXimize the performance of their iron shafts with trajectory, spin, and distance in a consistent, lighter weight package, making it easier for you to produce performance on every shot.

KBS MAX MT is a lightweight shaft for mid-high handicap players. It produces a high trajectory and spin rate for longer distance shots.

KBS MAX Lite

KBS Tourprogressive weight steel shafts are engineered with moment of inertia analysis to increase stability. With a mid/high flex point, these shafts generate a penetrating ball flight and low to mid spin. The higher balance point produces lower swing weights.

KBS Tour Black

KBS Tour Liteis designed for players seeking tight dispersion, higher trajectory, additional spin, precision control, & combining it with maximum distance in the ultimate lightweight package. The perfect golf weapon for a player of any skill level.

Mitsubishi

Mitsubishi MMTUtilizes a breakthrough Metal Mesh material which is made from individually braded strands of 304 Stainless Steel that is integrated into the shafts prepreg layers toward the tip, MMT (Metal Mesh Technology) improves density and stability, while also allowing for thinner overall composite wall construction, yielding a finely tuned, highly responsive shaft.

Nippon

Nippon Modus Tour Tis a mid/heavy steel shaft with a stiffer tip and softer mid section to control trajectory and provide tight dispersion.

Nippon NS PRO 750GH Neoaiming to provide a new standard for average golfers who prefer lightweight drivers.

Nippon NS PRO 950Ever since its release, this top-selling model has been a favorite among golfers of all levels looking to take points off their scores. It features exceptional weight balance and control, with ultra-lightweight design comparable to graphite that makes it easier than ever to swing.

Nippon NS PRO Modus Twas first brought out to tour as the N.S. PRO MODUS PROTO ST in 2010 and was put in play immediately. The PROTO ST was in the winning bags of eight professionals since its launch and became the second most popular MODUS irons shafts on tour, just behind the N.S. PRO MODUS Tour 120.

Project X

Project X LZincorporates Loading Zone technology by adding a series of small steps below the grip section of the classic tapered PX profile. This slightly softens the midsection and helps raise the trajectory slightly. The result is a stable, low/mid launching shaft with smooth feel.

Project X Tdeliver penetrating trajectory and ball flight and strike the perfect balance of unrivaled distance, stability and control for golfs most serious players.

True Temper

TT AMT Blackis the middle weight option in the new AMT range and delivers a mid-high trajectory and spin. Featuring Ascending Mass Technology, AMT Black gets progressively heavier as golfers move from their long irons to short irons.

TT Dynamic GoldDynamic Gold uses Variable Wall Technology and a tour-proven step pattern to provide exceptional performance for serious golfers. This high-flex, tour-weight steel golf shaft is designed for skilled players seeking a low, penetrating ball flight for optimum control and accuracy.

TT Dynamic Gold 105Engineered to be easier to swing, delivering the control and accuracy expected from the Dynamic Gold brand while adding distance from the increased club head speed produced by the lighter overall weight.

TT Dynamic Gold 120shaft delivers the tour-caliber accuracy of Dynamic Gold in a lighter weight steel shaft. Stronger players will experience the exact same profile and launch as Dynamic Gold in a shaft that is easier to swing.

TT Dynamic Gold 95A lightweight design that provides the stability and consistency that is inherent in the Dynamic Gold brand.

TT Dynamic Gold Mid 115designed to complement modern day equipment by utilizing a unique shaft geometry to create a stiffer mid-section with an active tip section to promote an increase in launch and spin when compared to other Dynamic Gold offerings in similar weight categories.

TT Dynamic Gold Tour Issue 115g Cpr/Blk

TT Dynamic Gold Tour Issue 115g

TT Dynamic Gold Tour Issue Blackshafts have the same tour-winning performance and weight sorting tolerances of Dynamic Gold Tour Issue, the #1 wedge shaft in the history of golf, but with a new liquid black finish.

TT Dynamic Gold Tour Issueprovide the same power, control and the trademark penetrating ball flight associated with the entire series of Dynamic Gold irons shafts. The Tour Issue steel shafts have a Tour Only weight tolerance for custom precision fitting. The Dynamic Gold Tour Issue golf shafts are available in sets of eight (3-PW) and in S400 and X100 flexes, .355 only.

TT Elevate 95 MPH Pdesign that helps increase initial launch/spin and creates optimal land angles to hold more green, Elevate Tour provides an option for players struggling with this low spin trend that are still looking for a slightly heavier shaft offering.

UST

UST Helium Nanocore 60lightweight golf shaft design, featuring our new Nanocore Technology for increased clubhead speed. Innovative materials and design profile stabilize shaft flexural and torsional characteristics in harmony with the ultra light weight design to optimize shaft performance and consistency with precise feel.

UST Recoil ESX TRecoil Technology provides optimal spring effect in the walls of the shaft and more efficient energy transfer to the ball for increased velocity and greater distance.

UST Recoil DART Tdesigned after years of research, testing and development to precisely optimize shaft hoop stiffness in the critical areas of the golf shaft. To achieve maximum distance, optimum hoop stiffness is designed into the energy transfer section of the shaft. In the tip. section, the hoop stiffness is increased to maintain feel while also stabilizing the tip section for maximum consistency and optimum ball flight.

UST Recoil DART ESX 60design technology also increases launch and ball flight characteristics. While DART technology optimizes hoop stiffness in the critical areas of the golf shaft.

UST Recoil DART HDC

TaylorMade Milled Grind PROTO Custom Wedge Grips

Golf Pride

Iomic

Lamkin

SuperStroke